LUCKSUN Landing Gear is designed to support the front section of a semi-trailer when it is disconnected from the tractor unit. It provides stable ground support during parking, loading, unloading, and trailer coupling operations.
Available in 27-ton and 28-ton series, these mechanical landing gear assemblies feature a reinforced support structure, manual crank operation, and a geared lifting mechanism.
The product range is developed for different semi-trailer mounting requirements, with multiple shoe models and lifting stroke configurations available.
Heavy duty semi trailer landing gear FLD27 and FLD28, 27T and 28T capacity
Heavy-duty 27T and 28T semi-trailer landing gear with two-speed lifting and multiple shoe options, built for reliable support across flatbed, container, tanker, dump and lowbed trailers.
27T and 28T capacity options per pair
80-ton static load rating per pair
Manual crank-operated lifting mechanism
Low-speed and high-speed gear settings
430 mm and 480 mm lift stroke options
Multiple mounting height configurations
Different shoe models for installation requirements
Related replacement components available
LUCKSUN heavy duty semi trailer landing gear, 27T and 28T specifications and selection guide
LUCKSUN heavy-duty landing gear in 27T and 28T capacities, with two-speed lifting and multiple shoe options for reliable support across commercial semi-trailers.
A typical landing gear assembly consists of:
Outer and inner support legs
Gearbox and transmission mechanism
Crank operating shaft
Connecting linkage
Mounting back plate
Supporting shoe or foot assembly
Internal gears and transmission shafts
LUCKSUN landing gear can be considered for compatible flatbed semi-trailers, skeletal container chassis, tanker trailers, dump trailers, and other commercial semi-trailer applications.
Before purchasing, confirm the required lifting capacity, static support capacity, mounting height, lift stroke, shoe model, and trailer frame dimensions.
The correct product selection helps reduce installation mismatches and supports reliable trailer parking and coupling operations.
LUCKSUN Heavy Duty Semi Trailer Landing Gear is designed to provide front-end support for semi-trailers when disconnected from the tractor unit. It is an essential mechanical component used during trailer parking, loading, unloading, and coupling operations.
The LUCKSUN landing gear range includes FLD27 and FLD28 series, offering rated capacities of 27 tons and 28 tons per pair respectively. Both series feature an 80-ton static load rating per pair and a manual crank-operated lifting mechanism.
With different lifting strokes, mounting heights, and shoe configurations, these landing legs provide multiple options for compatible commercial trailer designs.
Whether you are a semi-trailer manufacturer, fleet operator, spare parts distributor, or trailer parts importer, selecting the correct landing gear is important for ensuring proper installation and reliable stationary support.
LUCKSUN FLD27 27 ton semi trailer landing gear specification sheet with lift stroke, shoe models and dimensional drawing
FLD27 landing gear specifications: 27-ton capacity and 80-ton static load per pair, 430 mm / 480 mm lift stroke, five shoe models, with dimensional drawings for easy fitment checks.
1. Heavy-Duty Load Capacity
Available in FLD27 and FLD28 configurations, with rated capacities of 27 tons and 28 tons per pair. Both models have a specified static load rating of 80 tons per pair.
2. Manual Crank Operation
The mechanical lifting system uses a manual crank and internal gear mechanism to raise or lower the support legs.
3. Two Lifting Stroke Options
Available in 430 mm and 480 mm lift stroke configurations to accommodate different trailer mounting requirements.
4. Multiple Shoe Configurations
A, G, R, S, and T shoe model options are listed in the product specifications, providing different model configurations for trailer installation.
5. Low-Speed and High-Speed Gears
The gearbox provides two lifting-speed settings with different vertical movements per crank turn.
6. Related Spare Parts
Related components include transmission gears, shafts, powder metallurgy components, and nuts, as illustrated in the supplied product documentation.
A mechanical semi-trailer landing gear assembly consists of several interconnected parts that work together to provide vertical support.
Outer Support Leg: The main external structure of the landing gear assembly.
Inner Support Leg: Moves vertically to adjust the support height.
Gearbox: Transfers crank rotation into mechanical lifting movement.
Crank Operating Shaft: Connects the manual crank to the internal transmission mechanism.
Transmission Linkage: Connects the two landing legs for coordinated operation.
Mounting Back Plate: Provides the mounting interface between the landing gear and trailer frame.
Supporting Shoe: Provides the ground-contact support surface.
Internal Gears and Shafts: Transmit mechanical movement through the lifting system.
The exact component arrangement depends on the selected FLD27 or FLD28 model and its corresponding technical drawing.
The landing gear operates through a manual mechanical transmission system.
When the operator turns the crank handle, the gearbox transfers rotational movement through its internal gears. This movement drives the lifting mechanism, allowing the support legs to extend or retract.
The low-gear setting provides a smaller lifting movement per crank turn, while the high-gear setting provides a larger movement per turn.
The two landing legs are connected through a linkage system to support coordinated operation.
The operator must follow the manufacturer's instructions and ensure that the trailer is positioned and supported correctly before operating the landing gear.
LUCKSUN FLD28 28 ton semi trailer landing gear specification sheet with shoe models, dimensional drawing and replacement parts
FLD28 landing gear specifications: 28-ton capacity and 80-ton static load per pair, 430 mm / 480 mm lift stroke, five shoe models, with dimensional drawings and replacement gears, shafts and fittings for easy fitment and maintenance.
LUCKSUN offers two landing gear product series:
FLD27 – 27 Ton Landing Gear
Rated capacity: 27 tons per pair
Static load: 80 tons per pair
Low gear: 1 mm per crank turn
High gear: 11 mm per crank turn
Lift stroke: 430 mm / 480 mm
Linkage specification: 27T – 35.5 kg
FLD28 – 28 Ton Landing Gear
Rated capacity: 28 tons per pair
Static load: 80 tons per pair
Low gear: 0.7 mm per crank turn
High gear: 5.4 mm per crank turn
Lift stroke: 430 mm / 480 mm
Linkage specification: 28T – 17 kg
LUCKSUN landing gear can be considered for compatible:
Flatbed semi-trailers
Skeletal container chassis
Sidewall cargo trailers
Tanker semi-trailers
Dump semi-trailers
Other commercial trailer projects
The final model should be selected according to the trailer's front-end support requirements, mounting dimensions, and engineering specifications.
LUCKSUN focuses on semi-trailers and related components for international markets. We provide different landing gear configurations for customers with various trailer designs and purchasing requirements.
For product selection, please provide your required capacity, lift stroke, shoe model, mounting height, and technical drawing.
Contact LUCKSUN for landing gear specifications and quotation information.
LUCKSUN provides FLD27 and FLD28 mechanical landing gear series for heavy-duty semi-trailer applications.
The two product series feature different rated capacities, lifting movements, linkage specifications, and mounting dimensions.
Both series are available with 430 mm and 480 mm lift stroke options, as well as multiple shoe model configurations.
The FLD27 series is designed for compatible semi-trailer applications requiring a rated capacity of 27 tons per pair.
| Parameter | Specification |
|---|---|
| Product Series | FLD27 |
| Model | FLD27 |
| Rated Capacity | 27 Ton/Pair |
| Static Load | 80 Ton/Pair |
| Low Gear | 1 mm/Crank Turn |
| High Gear | 11 mm/Crank Turn |
| Operation | One-Side Operation |
| Linkage | 27T – 35.5 kg |
| Model | Shoe Model | Lift Stroke D (mm) | Mounting Height A (mm) | Height K (mm) |
|---|---|---|---|---|
| FLD27001A | A | 430 | 823 | 526 |
| FLD27001G | G | 430 | 779 | 526 |
| FLD27001R | R | 430 | 806 | 526 |
| FLD27001S | S | 430 | 831 | 526 |
| FLD27001T | T | 430 | 803 | 526 |
| Model | Shoe Model | Lift Stroke D (mm) | Mounting Height A (mm) | Height K (mm) |
|---|---|---|---|---|
| FLD27002A | A | 480 | 873 | 576 |
| FLD27002G | G | 480 | 829 | 576 |
| FLD27002R | R | 480 | 856 | 576 |
| FLD27002S | S | 480 | 881 | 576 |
| FLD27002T | T | 480 | 853 | 576 |
The FLD28 series provides a rated capacity of 28 tons per pair and is available in different mounting configurations for compatible trailer chassis.
| Parameter | Specification |
|---|---|
| Product Series | FLD28 |
| Model | FLD28 |
| Rated Capacity | 28 Ton/Pair |
| Static Load | 80 Ton/Pair |
| Low Gear | 0.7 mm/Crank Turn |
| High Gear | 5.4 mm/Crank Turn |
| Operation | One-Side Operation |
| Linkage | 28T – 17 kg |
| Model | Shoe Model | Lift Stroke D (mm) | Mounting Height A (mm) | Height K (mm) |
|---|---|---|---|---|
| FLD28001A | A | 430 | 814 | 526 |
| FLD28001G | G | 430 | 770 | 526 |
| FLD28001R | R | 430 | 797 | 526 |
| FLD28001S | S | 430 | 822 | 526 |
| FLD28001T | T | 430 | 794 | 526 |
| Model | Shoe Model | Lift Stroke D (mm) | Mounting Height A (mm) | Height K (mm) |
|---|---|---|---|---|
| FLD28002A | A | 480 | 864 | 576 |
| FLD28002G | G | 480 | 820 | 576 |
| FLD28002R | R | 480 | 847 | 576 |
| FLD28002S | S | 480 | 872 | 576 |
| FLD28002T | T | 480 | 844 | 576 |
The following table highlights the main differences between the two landing gear series.
| Specification | FLD27 | FLD28 |
|---|---|---|
| Rated Capacity | 27 Ton/Pair | 28 Ton/Pair |
| Static Load | 80 Ton/Pair | 80 Ton/Pair |
| Low Gear | 1 mm/Turn | 0.7 mm/Turn |
| High Gear | 11 mm/Turn | 5.4 mm/Turn |
| Lift Stroke | 430 / 480 mm | 430 / 480 mm |
| Height K | 526 / 576 mm | 526 / 576 mm |
| Shoe Models | A / G / R / S / T | A / G / R / S / T |
The FLD27 and FLD28 series share the same listed static load rating but differ in rated lifting capacity and lifting movement per crank turn.
The choice should be based on the required support capacity, operating requirements, mounting dimensions, and trailer engineering design.
The supplied product documentation also illustrates the following components:
Transmission gears
Connecting shafts
Powder metallurgy components
Nuts
Different supporting shoe configurations
These components are relevant when sourcing complete assemblies or replacement parts.
For accurate replacement, please confirm the original landing gear model, component dimensions, connection details, and technical drawing.
Rated capacity and static load are two different technical values.
Both values are specified per pair in the supplied product information.
Lift stroke D refers to the listed lifting stroke dimension.
Mounting height A varies according to the shoe model.
Height K is 526 mm for the 430 mm stroke models and 576 mm for the 480 mm stroke models.
A, G, R, S, and T are product model codes; their exact structural differences should be checked against the corresponding drawings.
Linkage figures are reproduced from the supplied specifications and should be confirmed for the exact assembly being ordered.
For technical confirmation, please contact LUCKSUN with the required model number and installation drawing.
Landing gear is an essential support component for commercial semi-trailers. It provides front-end support when the trailer is disconnected from the tractor unit.
Different trailer types have different chassis structures, front-end load distributions, and mounting requirements. Therefore, selecting the correct landing gear configuration is important for proper installation and operation.
Flatbed trailers are widely used to transport steel products, construction materials, machinery, and general cargo.
Landing gear provides stationary front-end support when the trailer is parked or disconnected from the tractor.
The mounting height and shoe configuration should match the flatbed trailer chassis design.
Skeletal container chassis are designed for transporting shipping containers between ports, terminals, warehouses, and inland destinations.
The landing gear should be selected according to chassis height, installation position, required support capacity, and mounting dimensions.
Tanker trailers are used for transporting liquid products and other compatible bulk materials.
Landing gear selection should consider the trailer's structural design, front-end support requirements, and specified operating conditions.
Dump trailers are commonly used in construction, mining, and bulk material transportation.
Their landing gear must be compatible with the chassis structure and the specified stationary support requirements.
Lowbed trailers are designed to transport heavy machinery, construction equipment, and other oversized cargo.
Because lowbed trailers have specialized frame structures and different installation heights, landing gear dimensions should be checked carefully before ordering.
Selecting the correct semi-trailer landing gear requires checking several important technical details.
First, identify the required landing gear rated capacity.
LUCKSUN provides two product series:
FLD27: 27 tons per pair
FLD28: 28 tons per pair
Both series have a listed static load rating of 80 tons per pair.
The selection must follow the trailer manufacturer's engineering requirements and actual front-end support load.
Two lift stroke configurations are available:
430 mm
480 mm
The required stroke depends on the trailer chassis height and intended operating range.
Mounting height is one of the most important dimensions when replacing or installing landing gear.
The FLD27 and FLD28 models have different mounting heights depending on the shoe model and lift stroke.
Always compare the product drawing with the actual trailer frame dimensions before ordering.
The available shoe model codes include:
A
G
R
S
T
Different model codes correspond to the configurations listed in the product specification.
Customers should provide the required model code or a photograph of the existing landing gear shoe for confirmation.
The connecting linkage is an important part of the mechanical lifting system.
Check the linkage specification, shaft arrangement, connection points, and compatibility with the selected landing gear assembly.
Before finalizing an order, check:
Mounting plate dimensions
Bolt-hole positions
Mounting height
Lift stroke
Chassis clearance
Shoe configuration
Linkage connection dimensions
Providing a technical drawing is recommended for replacement and customized trailer projects.
Correct installation helps ensure that the landing gear is properly integrated with the trailer chassis.
Before installation, the following points should be checked:
Mounting Position
The landing gear should be installed at the specified position according to the trailer engineering drawing.
Frame Compatibility
The mounting plate and trailer frame must have compatible dimensions and fastening arrangements.
Connection and Linkage
The transmission linkage should be correctly matched and installed according to the product instructions.
Ground Contact
The supporting shoes should contact a suitable and stable ground surface during operation.
Operating Clearance
Ensure sufficient clearance for the crank handle and other moving components.
Installation should be completed by qualified personnel according to the manufacturer's technical requirements.
Regular inspection and maintenance help identify potential problems before they affect trailer operation.
Check the gearbox for abnormal noise, difficult operation, visible damage, or signs of insufficient lubrication.
Inspect the inner and outer support legs for deformation, corrosion, cracks, and abnormal movement.
Check the crank handle, operating shaft, and connecting components for damage or looseness.
Check mounting bolts, fastening points, and surrounding chassis areas for cracks, deformation, or looseness.
Inspect the supporting shoe for visible damage and confirm that the ground-contact surface is suitable.
Follow the manufacturer's recommendations for lubrication and cleaning of the gearbox and moving components.
Damaged or excessively worn parts should be replaced with compatible components according to the approved maintenance procedure.
Safety Reminder: Never exceed the specified lifting or static load ratings. Landing gear should not be used as a substitute for approved safety stands when performing maintenance beneath a trailer.
Choosing a suitable landing gear supplier is important for trailer manufacturers, spare parts distributors, and commercial vehicle operators.
LUCKSUN focuses on semi-trailers and related components for international markets.
Our FLD27 and FLD28 series provide different rated capacities, lifting strokes, mounting heights, and shoe model configurations.
Product model tables and dimensional drawings help buyers identify the appropriate landing gear configuration.
The product range includes related gears, shafts, powder metallurgy components, nuts, and other illustrated accessories.
Different models can be evaluated according to the customer's trailer type, installation dimensions, and purchasing requirements.
In addition to landing gear, LUCKSUN supplies a range of semi-trailers and related components for international customers.
Semi-trailer landing gear supports the front section of a trailer when it is disconnected from the tractor unit. It is used during parking, loading, unloading, and coupling operations.
FLD27 has a rated capacity of 27 tons per pair, while FLD28 has a rated capacity of 28 tons per pair. Both have an 80-ton static load rating per pair. Their lifting movement per crank turn and linkage specifications are also different.
These figures refer to the rated capacity per pair as specified in the product documentation. They should not be confused with the static load rating.
Both FLD27 and FLD28 have a specified static load rating of 80 tons per pair.
The available lift stroke options are 430 mm and 480 mm.
These are the shoe model codes listed in the product specifications. Each code has a corresponding mounting height. Buyers should refer to the technical drawings to confirm the correct configuration.
Related components, including gears, shafts, powder metallurgy components, and nuts, are illustrated in the product documentation. Availability and compatibility should be confirmed according to the required model.
Provide the original model number, product photographs, mounting dimensions, lift stroke, shoe model, and technical drawing where available. These details help verify compatibility.
Different landing gear configurations can be evaluated for flatbed trailers, container chassis, tanker trailers, dump trailers, lowbed trailers, and other compatible commercial trailer projects.
Send your required model, capacity, lift stroke, shoe configuration, quantity, and destination country to the LUCKSUN team for product confirmation and quotation.
Looking for 27T or 28T heavy-duty semi-trailer landing gear?
LUCKSUN welcomes inquiries from semi-trailer manufacturers, importers, distributors, fleet operators, and spare parts wholesalers.
To help us identify the correct product, please provide:
Required model: FLD27 or FLD28
Required lift stroke: 430 mm or 480 mm
Shoe model: A / G / R / S / T
Mounting height
Required quantity
Trailer type and application
Technical drawings or reference photographs
Our team can review your requirements and discuss suitable product configurations.
LUCKSUN – Semi-Trailers and Parts for Global Markets.
Contact our team to request product details, technical specifications, and a quotation.